Poultry red mite: an eight-week control programme
Why one treatment does not work, where the mite actually lives, a ready eight-week programme with repeats and rotation, trap monitoring, and what an unseen mite costs.
Poultry red mite is a problem where a one-off treatment almost always creates a false sense of victory. A week later the mite is back, and that gets blamed on a weak product. The real cause is biology: acaricides do not act on eggs, and the mite survives downtime easily. So controlling it is a programme over several weeks, not a treatment.
Why one treatment does not work
| Stage | Does the acaricide act | What it means for the schedule |
|---|---|---|
| Egg | Effectively no | A new generation emerges in 5 to 7 days |
| Larva | Yes | Caught by the repeat treatment |
| Protonymph and deutonymph | Yes | They feed on blood, so they contact the treated surface |
| Adult | Yes | The main target of the first treatment |
Under favourable conditions, that is at 25 to 30 degrees, the full cycle from egg to adult takes about a week. Hence the key figure of the whole programme: a repeat treatment 5 to 7 days after the first, no later.
Where the mite actually lives
Dermanyssus gallinae spends only its feeding time on the bird, mostly at night. The rest of the time it is in crevices, and those are the target of treatment.
- Perch ends and mountings - the classic first place to check, always.
- Structural joints, bolted connections, weld seams.
- Under slats, under plastic flooring, inside channels.
- Nests and nest boxes, their floors and corners.
- Cracks in timber, fissures in concrete, insulation joints.
- The back of equipment, cable trays, brackets.
If the treatment went over walls and floor while perch ends and nests were left untreated, there will be no result regardless of the product.
An eight-week programme
| Week | What to do |
|---|---|
| 0 | Assess the infestation: harbourage traps at 5 to 8 fixed points, counts, photographs of the structures. Mechanical cleaning of crevices, removal of dust and down from harbourage |
| 1 | First treatment: a product with a confirmed acaricidal claim, wet application into the harbourage rather than over the area. Record product, group, concentration and temperature in the log |
| 2 | Repeat treatment 5 to 7 days later with the same product, to catch the generation from the eggs |
| 3 to 4 | Monitoring: traps weekly, same point, same day. No treatments while the count is falling |
| 5 | Second cycle if infestation remains: a product from a different IRAC group, the same harbourage-first logic |
| 6 | Repeat treatment of the second cycle 5 to 7 days later |
| 7 to 8 | Verification: traps, compared against week 0. Decision: control achieved, or a third cycle needed |
In our range the acaricidal option is Tinoks on azamethiphos, an organophosphate from IRAC group 1B that is effective against mite as well as flies and darkling beetles. For the second cycle take a product from another group, for example the pyrethroid Bagster EU from group 3A, bearing in mind that mites are often resistant to pyrethroids.
Why resistance shows up so clearly here
Pyrethroid resistance in Dermanyssus gallinae is widespread and well documented. The logic is the same as with flies: constant use of one group selects for survivors. But in mites it shows faster, because the cycle is short and treatments are repeated often.
Before blaming resistance, check three things: whether the harbourage itself was treated, whether the contact time was held, and whether the surface was clean. If all three are in order and the trap counts do not fall across two consecutive cycles, then change the group. The mechanics of rotation are covered in our piece on IRAC rotation.
What an unseen mite costs
Dermanyssus gallinae feeds at night and hides by day, so visually the problem looks absent for a long time. Meanwhile losses accumulate and spread across cost lines where they are hard to connect back to mite.
- Anaemia and lower lay. The mite feeds on blood, and at high infestation the blood loss becomes significant.
- Stress and behavioural problems. Birds rest poorly, restlessness rises, pecking can follow.
- Egg quality. Blood spots on the shell are a classic sign of heavy infestation, and that is direct downgrade.
- Pathogen transmission. The mite is described as a possible vector for a number of bacterial agents, adding microbiological risk to the mechanical one.
- Staff. At heavy infestation the mite bites people, which becomes a working conditions problem of its own.
Because the losses are spread this way, mite control usually starts late, when infestation is already high and the programme needs three or four cycles rather than two. That is exactly why trap monitoring, which costs pennies, pays back faster than anything else on the list.
Monitoring: how to count properly
| Parameter | How | Why |
|---|---|---|
| Trap type | Cardboard or plastic harbourage tube | The mite enters a crevice on its own; no attractant is needed |
| Number of points | 5 to 8 per building | Fewer gives unstable data, more does not get serviced |
| Where to place | Perch ends, joints, under slats, near nests | Where the mite hides, not where it is convenient |
| Frequency | Weekly, on the same day | Comparability matters more than frequency |
| What to record | Point number, date, count, stages | The trend per point shows where a focus remains |
| When to act | Two consecutive weeks of growth | A single spike can be noise |
What the programme does not replace
The mite lives in crevices, so anything that reduces the number of crevices works for you permanently: repairing cracks in concrete, replacing damaged timber, sealing insulation joints, clearing dust and down from structures. That is not housekeeping detail but a reduction in harbourage area - that is, in the part of the population an acaricide physically cannot reach.
On biology and economic losses see poultry red mite. On residual products and application see residual insecticides.
The full poultry house sanitation sequence, with products and label rates for every stage from insect control to fumigation, is on the poultry farm biosecurity page.
Frequently asked questions
Why does the mite come back a week after treatment?
Because acaricides barely act on eggs. You remove adults and nymphs, and 5 to 7 days later a new generation emerges from the eggs. That is why a single treatment never solves it: a repeat after 5 to 7 days is needed to catch what hatched after the first.
Treat the birds or the building?
The building. Dermanyssus gallinae spends only its feeding time on the bird, mostly at night, and the rest of the time in crevices, joints, perch ends, under slats and in nests. So treatment targets the harbourage, not the flock.
How long does the mite survive without feeding?
A very long time - studies report up to eight or nine months in cool conditions. Because of that, a downtime period alone does not solve the problem: the mite simply waits it out in the crevices and meets the next flock.
Why have pyrethroids stopped working?
Pyrethroid resistance in Dermanyssus gallinae is widespread and well documented. If a group 3A product worked and then stopped, resistance is the first hypothesis, and switching to another group such as an organophosphate delivers a result. But before that, check harbourage coverage and contact time.
How do you count mites so you can see the result?
The simplest way is cardboard or plastic harbourage traps at fixed points: perch ends, structural joints, under slats, near nests. Open and count them weekly. The trend matters, not the absolute number, and the points are never moved, otherwise comparison is impossible.
Do non-chemical methods help?
Yes, as part of a programme. Thermal treatment of the building, silica powders and diatomaceous earth deliver most in combination with mechanical cleaning of crevices and with chemical treatment. They usually cannot replace an acaricide at high infestation, but they reduce the need for repeat cycles.


