Choose a product and a task, then enter the surface area, room volume or solution volume. The calculator applies the concentration and application rate from the label and shows how much product and water you need, the mixing ratio and the number of packs.
How the calculator works
- Working solution volume equals the surface area multiplied by the label application rate (L/m²). For cold fogging and aerosols the room volume in m³ is used instead of the area.
- Product quantity equals the solution volume multiplied by the concentration: a 1% solution means 100 g of powder or 100 mL of concentrate per 10 L of water.
- Surface area is always larger than the floor area: it includes walls, ceiling, pens and equipment. Tick “Calculate from room dimensions” and the calculator adds the walls and ceiling for you.
- Drinking line volume can be worked out from the pipe length and inner diameter plus the volume of the tanks and the medicator.
Keep in mind
- Disinfectant goes on clean surfaces only: organic matter neutralises most active substances. Cleaning comes first, disinfection second.
- Mix the working solution just before treatment and keep to the contact time on the label. Porous concrete and wood absorb more solution than metal and plastic, so use the upper end of the application rate for them.
- Agree on outbreak disinfection regimes with the veterinary service.
How to turn the calculation into a treatment cost is covered in our article on dilution, usage and cost. Not sure which product to use? Try the product finder.